- Reviews (5)
- Questions (0)
Fantadtic glue. Easy repair
Repaired my inflatable SUP with this. So far, has held the seam together. Hopefully it will stay bonded for a couple of years. Need to follow directions to get the best bond.
Perfect solution for all of my inflatable repairs.
I Used Stabond Adhesive to apply D-rings to my Aire boat. The process was relatively simple once I contacted the folks at Aire to find out the process they use, as opposed to the mixed information from the web. This is the stuff Aire uses in their manufacturing, so no doubt about the bond strength. Masking the adhesion area was the most time consuming step, thereafter it was just a quick wipe with MEK on both boat and D-ring, then 2 very thin coats of Stabond, drying between coats, then heat activation with a heat gun and pressure. Worked perfectly!
Been on the water twice
Been on the water twice and the fin plate is still solid. Lets hope it stays this way. I would recommend this as an adhesive for the fin plate for an inflatable SUP